File(s) | Type | Description | Action |
---|---|---|---|
NH10_ts6hr.csv (4.85 MB) | Comma Separated Values (.csv) | Primary data file for dataset ID 2459 | Add to Cart Download |
Temperature and Salinity data from the Long-Term Observation Program (LTOP) Mooring site NH10 on the Oregon Shelf from 1997-2004 as part of the U.S. GLOBEC program.
A long-term mooring site on the Oregon shelf (44.6467N -124.3067E) was established in August 1997 and maintained with few gaps through December 2004 with U.S. GLOBEC funding. The mooring is at 81 m water depth, near the historical Newport Hydrographi Line. The nearest standard NH line station is NH10 (10 nautical miles off shore), so this mooring is referred to as Mooring NH10.
Upward looking acoustic Doppler current profilers have been used to measure vertical profiles of water velocity (insert actual sample interval here) at 2 or 4 m vertical intervals depending on instrument (data elsewhere on U.S. GLOBEC data server). The mooring is serviced in spring and fall. Temperature records are available for 11 depths; salinities for 4 depths. There are a few data gaps.
Temperature and salinity are processed using a cosine-Lanczos filter with a 40-hr half-power point. Six-hourly data included here are temperature (deg C) and salinity (PSS: unitless).
The data were collected by Mike Kosro, 104 COAS Admin Bldg, COAS, Oregon State University, Corvallis, OR 97331-5503 ( kosro@coas.oregonstate.edu; Phone: 541-737-3079).
Last modified: March 26, 2006
Kosro, M. (2007) Temperature and Salinity data from the Long-Term Observation Program (LTOP) Mooring site NH10 on the Oregon Shelf from 1997-2004 as part of the U.S. GLOBEC program (NEP project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 1) Version Date 2007-04-13 [if applicable, indicate subset used]. doi:10.1575/1912/bco-dmo.2459.1 [access date]
Terms of Use
This dataset is licensed under Creative Commons Attribution 4.0.
If you wish to use this dataset, it is highly recommended that you contact the original principal investigators (PI). Should the relevant PI be unavailable, please contact BCO-DMO (info@bco-dmo.org) for additional guidance. For general guidance please see the BCO-DMO Terms of Use document.